MK2110B 數控內圓磨床

機床的主要特點 Main Characteristics

?機床床身采用鑄件澆鑄，剛性好，結構穩，變形??；

?機床采用床頭箱固定在進給滑板上工件進給，砂輪作往復結構布 局；

?工件進給滑板及砂輪工作臺滑板采用高剛度十字交叉滾珠導軌；

?工件進給由伺服電機經聯軸器帶動高精度滾珠絲桿副來實現，進 給和補償為同一傳動鏈，結構緊湊，精度高；

?工件主軸采用整體套筒式主軸，剛性好，主軸軸承采用高精度成 對軸承，回轉精度高，穩定性好，主軸回轉變采用頻無級調速；

?采用超寬的工作臺和進給滑板結構，提高機床的整體剛性；

?機床配有防水全封閉罩売，觀察窗長期觀察清晰，耐油污并 砂輪破碎后不飛滅傷人；

?機床采用后置電器箱和前置回轉式操作臺以及獨立的循環啟動按 鈕。電箱帶熱交換器，以及確保在高溫期間正常運行；

?機床可據加工零件設計制作專用夾具；

?機床采用曰本三菱PLC控制系統、伺服單元及主要電器控制元 件，用戶如有特殊要求可選用其他控制系統；

?The machine bed adopts the casting piece with the features of good rigidity and small deformation.

?The headstock is fixed on the feed slide for achieving work feed. The gri. wheel reciprocation is also used.

?Work feed guideway and gri. wheel worktable guidaway adopt the crossed roller type.

?Work feed can be performed by the servo motor through the coupling via high-precision ball leadscrew pair.

?Table reciprocation movement can be achieved by mechanical oscillation which its reci. speed is adjusted by the freq.-conversion speed regulator. Cartridge-type work spindle is used. The high-precision matched spindle bearing is adopted with the features of high rotating accuracy and good reliability.

?Super-wide worktable and feed slide are used, thus improving good rigidity. It's totally enclosed with guards to prevent swarfs from splashing.

?The rear-mounted electrical cabinet and front-mounted control cabinet are also used. The heat-exchanger in the electrical cabinet is also provided.

?The special fixture can also be designed according to the machined workparts. Mitsubishi PLC control system a& servo unit is adopted. Other control system can also be selected for special order.

機床的主要結構main structure：

★本機床主要用于工件內孔，內端面，外端面，臺階子的磨削。

★機床床身采用澆鑄件，變形小，剛性好。

★機床參數的設置，修正采用觸摸屏形式，可實現人機對話。

★機床所有移動導軌采用高精度滾動直線導軌、滑動性好，進給往復絲杠采用高精度滾珠絲杠。

★機床進給系統和往復系統均采用伺服系統兩軸聯動控制。

★機床砂輪軸采用高速電主軸，由靜止變頻器控制，實現無級調速。

★床頭箱工件主軸軸承采用高精度滾動軸承，工件轉速為交流變頻，無級調速。

★機床可配三爪卡盤、液壓卡盤、薄膜卡盤、氣動卡盤等夾具供用戶選配。

★機床采用全封閉置殼，外形美觀大方。

★ This machine tool is mainly used for grinding the inner hole, inner end face, outer end face and step of the workpiece.

★The machine tool bed is made of cast parts with small deformation and good rigidity.

★ The machine tool parameters are set and corrected in the form of touch screen, which can realize man-machine dialogue.

★ All moving guideways of the machine tool adopt high-precision rolling linear guideways with good sliding performance, and the feed reciprocating lead screw adopts high-precision ball screw.

★ The feed system and the reciprocating system of the machine tool are controlled by the two-axis linkage of the servo system.

★ The grinding wheel shaft of the machine tool adopts high-speed electric spindle, which is controlled by static frequency converter to realize stepless speed regulation.

★ The spindle bearing of the headstock workpiece adopts high-precision rolling bearing, and the workpiece speed is AC variable frequency, stepless speed regulation.

★ The machine tool can be equipped with three-jaw chuck, hydraulic chuck, membrane chuck, pneumatic chuck and other fixtures for users to choose.

★ The machine tool adopts a fully enclosed shell with beautiful and generous appearance.

本頁面主要介紹MK2110B 數控內圓磨床的特點、技術參數、工作精度等，若想了解更多關于內圓磨床的型號，請繼續瀏覽本頁面。